Description
Specification:
| Model | AGH-4.2KW-PRO |
| Phase | 1-Phase |
| Maximum PV Input Power | 6200W |
| Rated Output Power | 4200W/4200VA |
| Maximum Solar Charging Current | 6.2KW 120A 4.2KW 140A |
| GRID-TIE OPERATION | |
| PV Input(DC) | |
| Nominal DC Voltage/Maximum DC Voltage | 360VDC/500VDC |
| Start-up Voltage/Initial Feeding Voltage | 90VDC/120VDC |
| MPPT Voltage Range | 90~450VDC |
| Number of MPPT/Max Input Current | 1/23A |
| GRID OUTPUT(AC) | |
| Norminal Output Voltage | 220/230/240VAC |
| Output Valtage Range | 195.5~253VAC |
| Norminal Output Current | 18.2A |
| Power Factor | >0.99 |
| Feed-in Grid Frequency Range | 49~51±1Hz |
| EFFICIENCY | |
| Max Conversion Efficiency(Solar to AC) | 0.98 |
| TWO LOAD OUTPUT POWER(V2.0) | |
| Full Load | 4200W |
| Maximum Main Load | 4200W |
| Max Second Load(battery mode) | 1400W |
| Main Load Cut Off Voltage | 22VDC |
| Main Load Return Voltage | 26VDC |
| OFF-GRID OPERATION | |
| AC Input | |
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC |
| Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
| Maximum AC Input Current | 30A |
| Nominal operating frequency | 50/60Hz |
| Surge power | 7200W |
| BATTERY MODE OUTPUT(AC) | |
| Nominal Output Voltage | 220/230/240VAC |
| Output Waveform | Pure sine wave |
| Efficiency(DC to AC) | 0.94 |
| BATTERY&CHARGER | |
| Nominal DC Voltage | 24VDC |
| Maximum Solar Charging Current | 120A |
| Maximum AC Charging Current | 100A |
| PHYSICAL | |
| Dimension,D*W*H(mm) | 110*334*423 |
| Net Weight(Kgs) | 9.5 |
| INTERFACE | |
| Communication Port | RS232/WIFI/GPRS |
| ENVIRONMENT | |
| Operating Temperature | -10~50℃ |
Features:
1.Pure Sine Wave Solar Inverter2.Max 120A MPPT Solar Charger3.Max 500VDC PV Input4. 2 Loads Output5.High PV input voltage range(120~450VDC)6.Output power factor 1.07.Real Solar inverter for 24V/48V system8.Wifi Module for easily connection9.Efficiency work with or without battery10.Bundled monitoring & setting software11.Supports 50hz or 60hz (program adjustable)12.Able to use ac grid or generator power13.Built-in anti-dusk kit for harsh environment14.Optional DC output for DC fan, LED bulb,router and so onNote:This is a wide voltage Solar inverter, If Solar Inverter without external battery ,The voltage which starts to connect to the solar panel must be above 150V for the inverter to work normally, if with external battery 120V is working. DO NOT CONNECT THE SECOND OUTPUT TO THE GRID,IT WILL DAMANGE YOUR INVERTER Advantage:Dual AC output: under normal conditions, the main circuit and secondary circuit outputs are used normally. When there is no PV and mains power input and the battery voltage is too low, the main circuit is disconnected and only the secondary circuit output is retained to save power.
Package included:
1 x DAXTROMN Power Mppt 4.2KW Solar Inverter
